English

Aluminom nwere ígwè Mandrel Peel Ụdị Rivet

Aluminom nwere igwe Mandrel Peel Ụdị Rivet egosipụtara
  • Aluminom nwere ígwè Mandrel Peel Ụdị Rivet
  • Aluminom nwere ígwè Mandrel Peel Ụdị Rivet
  • Aluminom nwere ígwè Mandrel Peel Ụdị Rivet

Nkọwa dị mkpirikpi:

• Ọdịdị mara mma, njigide njikọ
• Kwesịrị ekwesị maka oghere buru ibu ma ọ bụ nke na-adịghị mma
• Nkwado ahaziri agba RAL agba peel rivets
• Nhọrọ zuru oke nke dị nro, na-agbaji agbaji, riveting ihe dị mkpa


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ihe onwunwe

Ahụ Aluminom 5050, 5052, 5056
Mechaa Achachapụrụ, Tee
Mandrel Igwe igwe
Mechaa Efere Zine
Ụdị isi Dome, nnukwu Flange

Nkọwapụta

peeled rivets
D1 NOM. Nha oghere ART.CODE OGE JIJI L(MAX) D
NOM.		 K
MAX.		 P
MIN.		 SHEAR
LBS		 TENSILE
LBS
INCH MM INCH MM
1/8"
3.2mm		 0.136"
3.4-3.5		 ASP43 0.059-0.187 1.5-4.8 0,406 10.3 0.250"
6.4		 0.040"
1.02		 1.06"
27		 180
800N		 160
720N
ASP44 0.188-0.250 4.8-6.4 0,469 11.9
ASP45 0.251-0.312 6.4-7.9 0,528 13.4
ASP46 0.313-0.375 7.9-9.5 0,591 15.0
ASP48 0.376-0.500 9.5-12.7 0,717 18.2
5/32"
4.0mm		 0.167"
4.2-4.3		 ASP53 0.126-0.187 3.2-4.8 0,445 11.3 0.312"
7.9		 0.050"
1.27		 1.06"
27		 285
1270N		 260
1160N
ASP54 0.188-0.250 4.8-6.4 0,508 12.9
ASP56 0.251-0.375 6.4-9.5 0,630 16.0
ASP58 0.376-0.500 9.5-12.7 0,756 19.2
ASP510 0.501-0.625 12.7-15.9 0,882 22.4
ASP512 0.626-0.750 15.9-19.1 1.008 25.6
ASP514 0.751-0.875 19.1-22.2 1.130 28.7
3/16"
4.8mm		 0.199"
5.1-5.2		 ASP63 0.126-0.187 3.2-4.8 0,472 12.0 0.375"
9.5		 0.060"
1.52		 1.06"
27		 420
1870N		 362
1610N
ASP64 0.188-0.250 4.8-6.4 0,535 13.6
ASP66 0.251-0.375 6.4-9.5 0,657 16.7
ASP68 0.376-0.500 9.5-12.7 0,783 19.9
ASP610 0.501-0.625 12.7-15.9 0,910 23.1
ASP612 0.626-0.750 15.9-19.1 1.035 26.3
ASP614 0.751-0.875 19.1-22.2 1.157 29.4
ASP616 0.876-1.000 22.2-25.4 1.283 32.6
ASP618 1.001-1.125 25.4-28.6 1.410 35.8

Ngwa

Ụdị peel rivet, mandrel ahụ na-egbutu rivet ahụ site n'akụkụ kpuru ìsì, n'ime petals anọ dị ka ifuru.Ọ nwere ike gbasaa ibu ahụ n'elu ebe sara mbara ma belata ihe ize ndụ nke ịkụpịa.Ọ dabara adaba maka ijikọta ihe dị nro, na-agbaji agbaji, ihe dị mkpa dị ka plastik, roba, osisi na laminates.Na nguzobe petal ya na-akwụ ụgwọ maka oghere buru ibu ma ọ bụ nke na-adịghị mma.

Ụdị peel kpuru ìsì nke a na-ejikarị eme ihe n'ụgbọala, ụgbọala na-adọkpụ, akpati, arịa ụlọ, windo rọba, kaboodu ma ọ bụ ngwaahịa ọ bụla metụtara isonye nke ihe dị nro ma ọ bụ ihe na-adịghị mma.

bee ụdị rivet

A na-eji peel ụdị pop rivets na-akwakọba ihe ọṅụṅụ dị iche iche, nri, onyinye na ngwaahịa ndị ọzọ, na ngwaahịa ndị a ma ama bụ ndị na-egbochi ụgha.Ka ọ dị ugbu a, ọtụtụ puku ụlọ mmanya n'ofe mba ahụ etinyela ụdị ifuru osisi pop rivets na nkwakọ ngwaahịa mmanya na-egbu adịgboroja.Isi ọrụ ya bụ:

1. Mgbochi adịgboroja: Mgbe ị na-ewepụ ngwaahịa ahụ site na ngwugwu ahụ, onye ahịa ga-adọwa ngwugwu dị n'èzí, nke na-enweghị ike izere ngwa nke abụọ nke ngwugwu ngwaahịa, kamakwa ịnọgide na-arụ ọrụ na ntụkwasị obi nke ama ama nke ngwaahịa ahụ.

2. Gbaa mbọ hụ na ịdị mma ngwaahịa: N'oge usoro niile nke ịre ahịa na-enweta ihe nrite, hụ na onyinye ndị nrụpụta nyere ndị ahịa na-ezute na ndị ọrụ anaghị ewepụ ya n'ụzọ aka ike;

3. Mee mgbochi adịgboroja akara: ngwa nke ifuru ekara pop rivets na pụrụ iche imewe nwere ike ozugbo na-eje ozi dị ka mgbochi adịgboroja akara nke ngwaahịa, na-eme ka gị mgbochi adịgboroja atụmatụ ọzọ pụrụ ịdabere na;

4. Ji achọ imewe na ike mmetụta: riveting nkwakọ na okooko osisi ụdị pop rivets nwere ike ime ka nkwakọ ngwaahịa ọzọ guzosie ike, mara mma na-emesapụ aka, na-egbochi looseness na pullout nke n'ozuzu fasteners na dum usoro riveted adụ raw ihe, karịsịa akwụkwọ ngwaahịa, osisi, plastic na nkwakọ ngwaahịa ndị ọzọ.

  • Nke gara aga:
  • Osote:

    • Ngwaahịa ndị metụtara